Lighting Control Single Lamp Controller

• Customization: Available
• After-sales Service: Two Years
• Warranty: Two Years
• Model NO.: LON7021
• Display: Digital
• Installation: Direct Connected
• Usage: Meter for Industry and Home Use
• Electric Equipment: Three-phase Four-wire
• Theory: Electric Apparatus
• Measured Signal: Continuous Wave
• Type: Power Meter
• Certification: ISO
• Customized: Customized
• Trademark: Linkelec
• Origin: Made in China
• Production Capacity: 20000 Per Month

Product Description

Lighting control single lamp controller

1.Product Introduction
This product is a street lamp dedicated controller that can be widely used for lighting control in urban roads, community squares, industrial parks, tourist attractions, park green belts, and other places. The product considers the application needs of street lamps in various scenarios and has functions such as switch control, brightness adjustment, brightness gradient lighting, remote communication, and timed switching. At the same time, the product determines the working status of the controlled lamps by detecting the current value of the lamps, and can report abnormalities through remote communication; The product adopts high stability and low latency 4G/carrier communication, supporting unified lighting management by the main station or street lamp management unit.

 

2.Technical parameter

performance parameter		Performance index
input parameter	rated voltage	220V AC
	frequency range	45~65Hz
	Operating voltage range	176V~264V AC
	Power consumption	< 3W (without load)
Output parameter	Switching capacity	AC220V/5A (resistive load)
	load power	<500W
	Dimming interface	0~10V signal dimming
Measuring parameter	measurement accuracy	Voltage: ≤ 1%; Current: ≤ 1%; Active power: ≤ 2%;
	measurement accuracy	Active power: ≤ 2%
	measuring range	Current: 100mA~5A AC
		Voltage: 176V~264V AC
communication interface	communication method	4G communication/carrier module
environmental conditions	Working temperature	-20ºC~70ºC
	storage temperature	-40ºC~70ºC
	Working humidity	0 ~ 95% does not condense.
	atmospheric pressure	86kPa~106kPa
	the protection grades	IP66(NEMA interface type)
mechanical character	vibrate	GB/T 11287 severity level 1
	lash	GB/T 14537 severity level 1
	collide	GB/T 14537 severity level 1
Electromagnetic compatibility performance	Surge immunity	GB/T 17626.5-2008 Severity Grade 3
Electrical insulation performance	insulance	GBT 13729-2002, not less than 100MΩ.

 

 

3.Selection specifications

functional module	serial number	Function point	Function point description	Single lamp controller
Real-time measurement	1	voltage	Phase voltage: u	√
	2	electric current	Current: I	√
	3	active power	Active power: p	√
Electricity measurement	4	Active power	Bidirectional active energy	○
on-off control	5	on-off control	With a switch value outlet, the switch of the load can be controlled through remote communication.	√
Dimming control	6	brightness control	With 0~10V output interface, it can be connected with lamps with this dimming interface, and the brightness is controlled by remote command.	√
	7	Switch dimming	It can be configured to gradually change from the initial brightness to the target brightness when turning on the control, resulting in the effect that the brightness changes slowly to the target brightness after turning on the light.	√
Event alarm	8	Self-test fault	Real-time monitoring of lamp source failure, controller failure, unexpected lighting, lighting off and other failures.	√
	9	Over-limit alarm	When the detection functions of voltage and current crossing the lower limit and the upper limit are enabled by software configuration, it will be judged in real time whether the limit crossing occurs.	√
	10	Event reporting	Faults and out-of-limit events will be reported to the background system through communication.	√
communication interface	11	4G communication	Exchange data with server platform by 4G communication (NEMA interface)	○
	12	Carrier communication	Carrier communication (guideway type)	○
Note: "√" indicates that this function is standard, and "○" indicates that this function is optional.

4.Product perforation and installation diagram

5.About our service :                  
*  We could provide 7* 24-hour phone call after-sales service. 
*  We provide a 2-year guarantee time and will change the meter for you within 1 year if there's something wrong with the product. Except for natural disasters or man-made reasons.
*  Recommend the most advanced application technology and management model in the industry to customers, and provide customers with detailed solutions.

6.Delivery Diagram